�� Modular drives let you place motor and controller where convenient��ideal for limited spaces, hoods, or isolation chambers
�� Flow rate 0.06 to 3400 mL/min (depends on drive rpm and tubing size)
�� Three-digit LED display shows motor rpm��confirm speed setting at a glance
�� Membrane keypad for easy up-front control of speed, direction, and start/stop
More features ..
�� Reversible motor; purge tubing before or after pumping; pump fluid in either direction
�� LED indicators confirm motor direction
�� Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
�� Separate speed and power (on/off) control; maintain speed setting while turning pump on/off
�� ��0.25% speed control; meter and transfer fluids with accuracy and repeatability
�� Remote control capabilities via a DB9 female connector on back of drive: Speed control input 4 to 20 mA or 0 to 10 V; Pump direction (CW/CCW) via open collector or contact closure; Start/stop via open collector or contact closure
�� Splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated
�� 6-ft (1.8-m) cable connects drive and controller; use optional extension cable 07557-51 to extend to 15 ft (4.6 m)
L/S® modular drives feature reversible pumping and allow you the flexibility to separate the motor from the controller. These accurate modular drives have powerful motors, speed display, and ��0.25% speed control for precise flow regulation��ideal for metering applications.