�� Modular drives let you place motor and controller where convenient��ideal for limited or awkward spaces
�� Minimum flow rate is 0.04 LPM (0.01 GPM); maximum flow rate is 19 LPM (5.0 GPM) with the I/P High-Performance pump head or 26 LPM (6.9 GPM) with two stacked I/P Easy-Load or Standard pump heads
�� Three-digit LED display shows motor rpm��confirm speed setting at a glance
�� Membrane keypad for easy up-front control of speed, direction, and start/stop
�� Reversible motor��purge tubing before or after pumping; pump fluid in either direction
�� LED indicators confirm motor direction
�� Powerful motors let you stack two pump heads for increased flow rates and for multichannel applications
�� Separate speed and power (on/off) control��maintain speed setting while turning pump on/off
�� ��0.25% speed control; meter and transfer fluids with accuracy and repeatability
�� Remote control capabilities via a DB9 female connector on back of controller
�� �C Speed control input
�� �C Pump direction (CW/CCW) via open collector or contact closure
�� �C Start/stop via open collector or contact closure
I/P modular drives feature reversible pumping and allow you the flexibility to separate the motor from the controller. These accurate modular drives have powerful motors, speed display, and ��0.25% speed control for precise flow regulation��ideal for metering and critical transfer applications.
Splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated
6-ft (1.8-m) cable connects drive and controller; optional extension cable 07557-51 is available to extend distance to 15 ft (4.5 m)
What's Included:
6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.